manualshive.com logo in svg

Advantech PCM-4386, User Manual, Page: 2 / 110

Share
Download
Advantech PCM-4386 User Manual Download Page 2

PCM-4386 User Manual

ii

Copyright

This document is copyrighted, © 2006. All rights are reserved. The origi-
nal manufacturer reserves the right to make improvements to the products 
described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated or transmit-
ted in any form or by any means without the prior written permission of 
the original manufacturer. Information provided in this manual is 
intended to be accurate and reliable. However, the original manufacturer 
assumes no responsibility for its use, nor for any infringements upon the 
rights of third parties that may result from such use.

Acknowledgements

Award is a trademark of Award Software International, Inc.
VIA is a trademark of VIA Technologies, Inc.
IBM, PC/AT, PS/2 and VGA are trademarks of International Business 
Machines Corporation.
Intel, Pentium, Celeron, and MMX are registered trademarks of Intel Cor-
poration. 
Microsoft Windows

®

 is a registered trademark of Microsoft Corp. 

RTL is a trademark of Realtek Semi-Conductor Co., Ltd.
ESS is a trademark of ESS Technology, Inc.
UMC is a trademark of United Microelectronics Corporation.
SMI is a trademark of Silicon Motion, Inc.
Creative is a trademark of Creative Technology LTD.
All other product names or trademarks are properties of their respective 
owners.

For more information on this and other Advantech products, please visit 
our websites at:

http://www.advantech.com
http://www.advantech.com/eplatform

For technical support and service, please visit our support website at: 

http://www.advantech.com/support

This manual is for the PCM-4386.

Part No. 2006438610                                                               1st Edition
Printed in Taiwan    

                                                     May. 2006 

Summary of Contents for PCM-4386















































































































Reviews:

No comments