11
Chapter 2
2.3 Installation Procedures
2.4 Ethernet connector (CN6)
The PCM-3341 is equipped with a high performance 32-bit PCI-bus Fast
Ethernet interface which is fully compliant with IEEE 802.3u 100/
10Base-T specifications. It is supported by all major network operating
systems.
The medium type can be configured via the RSet8139.EXE program
included on the utility disk. (See Chapter 5 for detailed information.)
2.4.1 Ethernet connector (CN6)
10/100Base-T connects to the PCM-3341 via an adapter cable to the 10-
pin 2 mm connector.
2.5 TFT panel connector (CN12)
CN12 is a 40-pin dual-in-line header and is used to connect an LCD dis-
play to the PCM-3341.
Warning:
Always completely disconnect the power cord
from your board whenever you are working on it.
Do not make connections while the power is on,
because sensitive electronic components can be
damaged by a sudden rush of power.
Caution:
Always ground yourself to remove any static
charge before touching the board. Modern elec-
tronic devices are very sensitive to static electric
charges. Use a grounding wrist strap at all times.
Place all electronic components on a static-dissi-
pative surface or in a static-shielded bag when
they are not in the chassis.
Summary of Contents for PCM-3341 Series
