Advantech PCLS-848-P User Manual Download Page 30

Page: 30 / 106

2 4

PCLS-848-P User's Manual

3.4.4. ieenter

NAME:

ieenter

—

Enters a string from a device or the interface

SYNTAX:

ieenter(addr,instr);

addr:integer;

Device address. If 0<=addr<=30, then it enters the string from
the specified device. Otherwise, it enters the string from the
interface.

instr: Istring;

The data string entered.

DESCRIPTION:

This procedure enters a string from a device or from the interface. Reading is
terminated upon receiving the terminator specified by the EOL command or the
maximum length of data bytes is reached.

BUS ACTIVITY:

- If 0 <= addr <= 30

ATN is set true.

REN is set true.

UNL is sent.

TAD is sent.

MLA is set.

ATN is set false.

Data string is entered.

- If addr < 0 or addr > 30

ATN is set false.

Data string is entered.

REMARK:

The length of the string entered can be checked by iestatUs( ).

Summary of Contents for PCLS-848-P











































































































Search results

Summary of Contents for PCLS-848-P

Reviews:

Related manuals for PCLS-848-P

Brands by name

Popular brands

Advantech PCLS-848-P, User Manual

Search results

Summary of Contents for PCLS-848-P

Reviews:

Related manuals for PCLS-848-P

Brands by name

Popular brands