manualshive.com logo in svg

Advantech PCA-6751 Series, User Manual

Share
Download
Advantech PCA-6751 Series User Manual Download Page 34

Chapter 2  Connecting Peripherals

25

2.18 AT power connector (CN20)

If you prefer not to acquire power through PCA-6751 Series'  back-
plane via the gold H-connectors, CN20 also provides power input
connectors for +5 V, -12 V and +12 V. Pin 8 of the PS/2 power
supply can be used, too.

2.19 Keyboard and PS/2 mouse connector

(CN21)

The PCA-6751 Series' board provides a keyboard connector. A 6-pin
mini-DIN connector (CN21) on the card mounting bracket supports
single-board computer applications. The card comes with an adapter
to convert from the 6-pin mini-DIN connector to a standard DIN
connector and to a PS/2 mouse connector.

2.20 ISA gold fingers (CN22, CN23)

The 16-bit ISA gold fingers are used for connecting the PCA-6751
Series to an ISA passive backplane.

2.21 CompactFlash™ disk (CN24)

The PCA-6751 Series is equipped with a CompactFlash™ disk socket
on the solder side that supports the IDE interface for CompactFlash
cards. The onboard CompactFlash™ socket is designed to prevent
incorrect installation. Make sure that the system power is off when
installing and removing CompactFlash™ cards.

The CompactFlash™ card is defaulted as the E drive on your
PC.system.

Summary of Contents for PCA-6751 Series
















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands