manualshive.com logo in svg

Advantech PCA-6751 Series, User Manual

Share
Download
Advantech PCA-6751 Series User Manual Download Page 33

24

PCA-6751 Series  User's Manual

2.15.2 RS-232/422/485 connection

        (COM2: CN15: RS-232; CN14: RS-422/485)

COM2 is an RS-232/422/485 serial port. The specific port type is
determined by jumper settings (JP1), as detailed in Chapter 1.

The IRQ and address range for both ports are fixed. However, if you
wish to disable the port or change these parameters later, you can do
this in the system BIOS setup. The table below shows the settings for
the PCA-6751 Series' board's ports:

Table 2-3: Serial port default settings

Port

Address

Interrupt

Default

COM1

3F8, 3E8

IRQ4

3F8

COM2

2F8, 2E8

IRQ3

2F8

2.16 External keyboard connector (CN17)

In addition to the PS/2 mouse/keyboard connector, an additional
external keyboard connector is provided.

For external keyboard pin assignments, see Appendix D.

2.17 ATX power connector (CN18)

If the PCA-6751 Series is used as a standalone card, both the 4-pin
main power connector (CN20) and the ATX power connector (CN18)
must be connected to the power supply. If the PCA-6751 Series is
used with a passive backplane, the main power connector (CN20)
should not be connected as the card will be powered from the back-
plane.

Use the ATX adapter cable (provided) to connect the PCA-6751
Series with the ATX power supply. The ATX adapter cable has two
different connectors at either end. The ATX 20-pin (female type)
connects to the power supply, while the 3-pin (female type) connects
to the ATX power connector (CN18) on the board itself.

Summary of Contents for PCA-6751 Series
















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands