Advantech PCA-6743 User Manual Download Page 33 | Manualshive

Page: 33 / 70

background image

PCA-6743 User Manual

24

2.18

Flat Panel display connector (LCD1 & LVDS1)

The PCA-6743's VGA interface can drive conventional CRT displays and is capable
of driving LVDS (optional) and TTL flat panel displays. The board has three connec-
tors to support these displays: one for standard CRT VGA monitors, one for TTL type
LCD panels, another one for LVDS (optional) type LCD panels.

PCA-6743 uses SMI SM712 2D graphic Chip offering enhanced capabilities for dual
view and for handling dual applications, CRT+TTL, and CRT +LVDS (optional), while
dual independent display, each display can support independent full screen full
motion video, as well as independent graphics refresh rates, resolutions, and color
depths. LVDS (optional) and TTL can support resolutions of 640X480, 800X480,
800X600 and 1024X768.

2.18.1

TTL TFT LCD connector (LCD1)

For PCA-6743, LCD1 consists of a 40-pin connector which can support 1024 x 768
@ 18/24-bit TTL TFT LCD panel.

2.18.2

LVDS TFT LCD connector (LVDS1) (Optional)

For PCA-6743, LVDS1 consists of a 20-pin connector which can support 1024 x768
@ 18/24-bit LVDS TFT LCD panel for optional.

«
...
31
32
33
34
35
...
»

Summary of Contents for PCA-6743







































































Reviews:

No comments

Related manuals for PCA-6743

Brand: Palo Alto Network Pages: 56

Brand: National Instruments Pages: 162

Transportation FiberinMotion

Brand: Radwin Pages: 122

Brand: Garland Pages: 6

Brand: Industrex Pages: 51

tBOX330-870-FL Series

Brand: AXIOMTEK Pages: 2

Brand: Funkwerk Pages: 2

Brand: Amplifier Tech Pages: 36

EK-FB GA AX370 Gaming RGB Monoblock

Brand: ekwb Pages: 2

Brand: Alesis Pages: 61

Brand: NKE Pages: 15

Brand: Teletronics International Pages: 57

Brand: M-system Pages: 4

Brand: Aaeon Pages: 119

LL140 RGB Series

Brand: Corsair Pages: 30

Network Scanning Unit A

Brand: Ricoh Pages: 206

Brand: Digital Equipment Pages: 90

Brand: Cypress Semiconductor Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands