Advantech PCA-6742 Series User Manual Download Page 2 | Manualshive

Page: 2 / 58

background image

PCA-6742 User Manual

ii

Copyright

The documentation and the software included with this product are copyrighted 2008
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. Information provided in this manual is intended to be accurate and reliable. How-
ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe-
ments of the rights of third parties, which may result from its use.

Acknowledgements

Award is a trademark of Award Software International, Inc.
VIA is a trademark of VIA Technologies, Inc.
IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Cor-
poration.
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows® is a registered trademark of Microsoft Corp.
RTL is a trademark of Realtek Semi-Conductor Co., Ltd.
ESS is a trademark of ESS Technology, Inc.
UMC is a trademark of United Microelectronics Corporation.
SMI is a trademark of Silicon Motion, Inc.
Creative is a trademark of Creative Technology LTD.
All other product names or trademarks are properties of their respective owners.

For more information on this and other Advantech products, please visit our websites
at:

http://www.advantech.com
http://www.advantech.com/eplatform

For technical support and service, please visit our support website at:

http://www.advantech.com/support

This manual is for the PCA-6742.

Part No. 2002674200

Edition 1

Printed in Taiwan

September 2008

«
1
2
3
4
...
»

Summary of Contents for PCA-6742 Series



























































Reviews:

No comments

Related manuals for PCA-6742 Series

Brand: M-Audio Pages: 10

System x3630 M4

Brand: IBM Pages: 7

Univerge SV9300

Brand: NEC Pages: 26

Brand: NEC Pages: 20

DS2000 IntraMail

Brand: NEC Pages: 2

Brand: EAW Pages: 6

Brand: EAW Pages: 6

EK-Vector Radeon RX5700 + XT Backplate

Brand: ekwb Pages: 7

Brand: Kontron Pages: 42

Power System H924

Brand: IBM Pages: 48

E5345 - Xeon 2.33 GHz 8M L2 Cache 1333MHz FSB LGA771 Active Quad-Core Processor

Brand: Intel Pages: 112

Brand: ICP DAS USA Pages: 62

Aeroflow FX 120 VAF-1225

Brand: Vantec Pages: 2

Brand: Digi Pages: 339

Brand: Jäger Pages: 54

Brand: Omnia Pages: 130

System 200V PC 288

Brand: VIPA Pages: 54

Brand: Ezviz Pages: 38

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands