manualshive.com logo in svg

Advantech PCA-6181, Manual, Page: 100 / 126

Share
Download
Advantech PCA-6181 Manual Download Page 100

8 6

PCA-6181  User’s Manual

6.9 Installation under Windows NT/Win-

dows 2000

If you are only using SCSI hard drives without any IDE HDD drive
installed. Please follow these steps:

1. Insert Windows NT/Windows 2000 CD Disk.

2. Press F6 immediately when it displays: “Set up is inspecting your
computer’s hardware configuration.”

3. Then it enter SCSI installation. Please insert SCSI driver floppy disk.

• 

BIOS Support for Bootable CD-ROM

s—(Default: 

Enable

d)

   When set to 

Enable

d, the SCSI card BIOS allows the computer to

   boot from a CD-ROM drive.

• 

BIOS Support for Int 13 Extension

s—(Default: 

Enable

d) When

   set to 

Enable

d, the SCSI card BIOS supports Int 13h extensions as

   required by Plug-and-Play. The setting can be either enabled or
   disabled if your system is not Plug-and-Play.

6.8 Using SCSI Disk Utilities

To access the SCSI disk utilities, follow these steps:
1. Select the 

SCSI Disk Utilities 

option from the menu that

    appears after starting SCS

ISele

ct. SCS

ISelect 

scans the SCSI bus

    (to determine the devices installed) and displays a list of all SCSI

Summary of Contents for PCA-6181































































































































Reviews:

No comments