Advantech PCA-6006 Page 48 User Manual Download

Page: 48 / 132

PCA-6006 User’s Manual

3.6.2 On-Chip Secondary PCI IDE

If you enable IDE HDD Block Mode, the enhanced IDE driver will be
enabled. Leave IDE HDD Block Mode on the default setting.

3.6.3 USB Controller

Select Enabled if your system contains a Universal Serial Bus (USB) con-
troller and you have USB peripherals. The choices: Enabled, Disabled.

3.6.4 USB Keyboard/Mouse Support

Select Enabled if user plan to use an USB keyboard. The choice:
Enabled, Disable.

3.6.5 AC97 Audio

Select Disable if you do not want to use AC-97 audio. Option is Auto,
Disable.

3.6.6 Init Display First

This item allows you to choose which one to activate first, PCI Slot or on-
chip VGA. The choices: PCI Slot, Onboard.

3.6.7 Onboard LAN1 Control

Option is Enable and Disable. Select Disable if user does not want to use
onboard LAN controller1

3.6.8 Onboard LAN2 Control

Option is Enable and Disable. Select Disable if user does not want to use
onboard LAN controller2

Figure 3.5: Integrated peripherals (1)

Summary of Contents for PCA-6006





































































































































Search results

Summary of Contents for PCA-6006

Reviews:

Related manuals for PCA-6006

Brands by name

Popular brands

Advantech PCA-6006, User Manual

Search results

Summary of Contents for PCA-6006

Reviews:

Related manuals for PCA-6006

Brands by name

Popular brands