Advantech PCA-6006 Page 53 User Manual Download

Page: 53 / 132

Chapter 3

3.7.11 PowerOn By Alarm

When Enabled, your can set the date and time at which the RTC (real-
time clock) alarm awakens the system from Suspend mode. The choices:
Enabled, Disabled.

3.7.12 Primary IDE 0 (1) and Secondary IDE 0 (1)

When Enabled, the system will resume from suspend mode if Primary
IDE 0 (1) or Secondary IDE 0 (1) is active. The choice: Enabled, Dis-
abled.

3.7.13 FDD, COM, LPT PORT

When Enabled, the system will resume from suspend mode if FDD, COM
port, or LPT port is active. The choice: Enabled, Disabled.

3.7.14 PCI PIRQ [A-D]#

When Enabled, the system will resume from suspend mode if interrupt
occurs. The choice: Enabled, Disabled.

Figure 3.8: Power management setup screen (2)

Summary of Contents for PCA-6006





































































































































Search results

Summary of Contents for PCA-6006

Reviews:

Related manuals for PCA-6006

Brands by name

Popular brands

Advantech PCA-6006, User Manual

Search results

Summary of Contents for PCA-6006

Reviews:

Related manuals for PCA-6006

Brands by name

Popular brands