manualshive.com logo in svg

Advantech PCA-6006, User Manual, Page: 2 / 132

Share
Download
Advantech PCA-6006 User Manual Download Page 2

PCA-6006 User’s Manual

ii

Copyright Notice

This document is copyrighted, 2003, by Advantech Co., Ltd. All rights 
are reserved. Advantech Co., Ltd. reserves the right to make improve-
ments to the products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated or transmit-
ted in any form or by any means without the prior written permission of 
Advantech Co., Ltd. Information provided in this manual is intended to 
be accurate and reliable. However, Advantech Co., Ltd. assumes no 
responsibility for its use, nor for any infringements upon the rights of 
third parties which may result from its use.
Acknowledgements
•AWARD is a trademark of Phoenix Technologies Ltd.
•IBM and PC are trademarks of International Business Machines Corpo-
ration.
•Intel®, Pentium® 4, and Celeron™ are trademarks of Intel Corporation.
•WinBond is a trademark of Winbond Corporation.
All other product names or trademarks are the properties of their respec-
tive owners.

                                                           Part No. 2002600610             1st. Edition

                                                      Printed in Taiwan                   June 2003

Summary of Contents for PCA-6006





































































































































Reviews:

No comments