13
NYS-3510/NYS-3520 User Manual
Chapter 2
Installation
2.2.2
Settle System
After mounted the chassis, it is time to settle the whole system.
Connect to network
Connect Ethernet cable to the RJ-45 jack.
Insert SD card
Insert SD card into the slot. The maximum acceptable storage is 32 GB SDHC.
Connect Audio
Plug in speaker and microphone to Audio Line-In and Line-Out jack.
Connect Video
Plug in BNC jack of video camera to Video Input connector.
Connect Power
Connect 12 to 24 V DC to power terminal block.
The left pin V- connects to ground.
The right pin V+ connects to 12 V / 24 V.
Plug the terminal into chassis.
Connect RS-485 Lines
Two sets of RS-485
D1+, D1- are the first set. Control PTZ camera.
D2+, D2- are the second. Control Modbus device.
Plug the terminal into chassis.
V- V+
D1+ D1- D2+ D2- GND
Summary of Contents for NVS-3510
