Advantech MIT-W102 Series, User Manual

Page: 3 / 73

3
Declaration of Conformity
CE Conformity Statement
Radio products with the CE alert marking comply with the RED Directive
(2014/53/EU) issued by the Commission of the European Community. Compliance
with this directive implies conformity to the following European Norms (in brackets
are the equivalent international standards).
• EN 62368-1 (IEC62368-1) - Product Safety
• EN 300 328 Technical requirement for radio equipment
• EN 301 893 Technical requirement for radio equipment
• ET S301 489 General EMC requirements for radio equipment
Products that contain the radio transmitter are labeled with CE alert marking and
may also carry the CE logo.
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference;
2. This device must accept any interference received, including interference that
may cause undesired operation.
The WLAN & BT function of this product uses a certified module and according to
FCC regulations contains RF module FCC ID : PPD-QCNFA364AH , IC :
4104A-QCNFA364A or FCC ID : TX2-RTL8822CE , IC : 6317A-RTL8822CE.
CAUTION!
Exposure to Radio Frequency Radiation.
The radiated output of this device is far below the
FCC radio frequency exposure limits. Nevertheless,
the device shall be used in such a manner that the
potential for human contact during normal
operation is minimized. When connecting an
external antenna to the device, the antenna shall be
placed in such a manner to minimize the potential
for human contact during normal operation.
This
transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
For body worn operation, this device has been
tested and meets FCC RF exposure guidelines. When