manualshive.com logo in svg

Advantech MIO-2361 Series, User Manual, Page: 52 / 90

Share
Download
Advantech MIO-2361 Series User Manual Download Page 52

MIO-2361 User Manual

42

3.1.6

Save & Exit

 

Save Changes and Exit

This item allows you to exit system setup after saving the changes.

Discard Changes and Exit

This item allows you to exit system setup without saving any changes.

Save Changes and Reset

This item allows you to reset the system after saving the changes.

Discard Changes and Reset

This item allows you to rest system setup without saving any changes.

Save Changes

This item allows you to save changes done so far to any of the options.

Discard Changes

This item allows you to discard changes done so far to any of the options.

Restore Defaults

This item allows you to restore/load default values for all the options.

Save as User Defaults

This item allows you to save the changes done so far as user defaults.

Restore User Defaults

This item allows you to restore the user defaults to all the options.

Boot Override

Boot device selection can override your boot priority.

Summary of Contents for MIO-2361 Series



























































































Reviews:

No comments