Advantech MIO-2361 Series, User Manual, Page: 20 / 90

MIO-2361 User Manual 10
HDMI display connector (CN13)
Supports HDMI1.4b. Resolution: up to 3840 x 2160 at 30Hz.
LVDS LCD panel connector (CN12)
MIO-2361 supports dual channel 48-bit LVDS LCD panel displays. Resolution: up to
1920 x 1200.
2.2.2.5 Front Panel Connector(CN45)
MIO-2361 integrates below functions as front panel 9-pin connector.
Power button
Supports power on/off button in ATX mode.
Reset
If you install a reset switch, it should be an open single pole switch. Momentarily
pressing the switch will activate a reset.
Power LED
Power LED indicator light lit when power is on.
HDD LED
HDD LED indicator for hard disk access is for an active low signal.
2.2.2.6 SATA Connector (CN15)
MIO-2361 supports one high performance Serial ATA interfaces. Data transfer rates
up to 600 MB/s enabling very fast data and file transfer, and independent DMA oper-
ation on two ports.
2.2.2.7 Mini PCIe Connector (CN18)
MIO-2361 supports a full size mini PCIe slot. PCI Express Mini Card (also known as
Mini PCI Express, Mini PCIe, and Mini PCI-E) is a replacement for the Mini PCI form
factor based on PCI Express. It is developed by the PCI-SIG. The host device sup-
ports both PCI Express and USB 2.0 connectivity. The mini PCIe slot also integrates
SATAIII signals, supports mSATA interface modules. (*mSATA is by optional request)
2.2.2.8 USB Connectors (CN22 and CN33)
MIO-2361 provides 4 x USB (Universal Serial Bus) ports, two are external I/O ports
(CN22); the other two are internal USB ports (CN33). The rear I/O USB port supports
two USB 3.0 ports. The USB 3.0 ports comply with USB specification Rev. 3.0 which
supports 5.0 Gbps transfer rate and backward compatible with USB 2.0 device. This
gives complete Plug and Play, and hot attach/detach for up to 127 external devices.
Other USB interfaces comply with USB specification Rev. 2.0 which supports 480
Mbps transfer rate and are fuse protected.
2.2.2.9 COM Port Connectors (CN54)
MIO-2361 provides two serial ports in 10 x 2pin pin header. COM1/COM2 is for
RS232/422/485 functionality. It provides connections for serial devices or a communi-
cation network. The pin assignments for the COM port connector can be found in
Appendix.
2.2.2.10 Ethernet Connector (CN9/CN10)
MIO-2361 uses Intel® i210IT/i210AT Ethernet chip (10/100/1000 Mbps) linked to
dedicated PCIe x1 lane via RJ-45 connector.
2.2.2.11 High Definition Audio Interface (CN16)
MIO-2361 provides one 5 x 2 pin box header for audio device. It can support high
definition audio stereo via customized audio module that has a codec onboard.