Advantech MIO-2361 Series, User Manual, Page: 19 / 90

9 MIO-2361 User Manual
Chapter 2
H
/W Installation
2.2 Connectors
2.2.1 Connector List
2.2.2 Connector Settings
2.2.2.1 Battery Connector (CN4)
MIO-2361 supports Lithium 3 V/210 mAH CR2032 battery with wire.
2.2.2.2 12 V Power Input Connector (CN1)
Main power connector supports single 12 V input, and there's an optional choice of
DC/Jack (CN2, co-layout with 2pin power connector)
2.2.2.3 GPIO (General Purpose Input Output) (CN34 & CN35)
The board supports 16-bit GPIO (5 V tolerance) through GPIO pin header. The 16
digital inputs and outputs can be programmed to read or control devices, with each
input or output defined.
2.2.2.4 HDMI/ LVDS Interface Connections (CN13/CN12)
MIO-2361 has a dual display interface which supports HDMI displays (included pas-
sive LCD and active LCD displays).
CN1 12 V Power Input
CN2 DC JACK
CN4 Battery
CN9 LAN
CN10 LAN
CN12 48-bit LVDS Panel
CN13 HDMI
CN15 SATA
CN16 Audio
CN18 Mini PCIE
CN22 External USB3.0
CN23 SMBus
CN33 Internal USB
CN34 GPIO
CN35 GPIO
CN45 Front panel
CN54 COM1/COM2
CN57 Inverter Power Output
Note! How to clear CMOS: (follow below steps)
1. Turn off system power
2. Unplug CR2032 battery cable on CN4
3. Waiting for 15 sec or short CN4 pin 1-2
4. Connect battery cable on CN4
5. Turn on system power