manualshive.com logo in svg

Advantech MIC-5602, User Manual

Share
Download
Advantech MIC-5602 User Manual Download Page 34

MIC-5602 User Manual

22

4.1

Introduction

The AMI BIOS has been customized and integrated into many industrial and embed-
ded motherboards for over a decade. This section describes the BIOS which has
been specifically adapted to the MIC-5602. With the AMI BIOS Setup program, you
can modify BIOS settings and control the special features of the MIC-5602. The
Setup program uses a number of menus for making changes and turning the special
features on or off. This chapter describes the basic navigation of the MIC-5602 setup
screens.

Figure 4.1 Setup program initial screen

The BIOS ROM has a built-in Setup program that allows users to modify the basic
system configuration.

Note!

As an option, the BIOS setup information can be stored in a battery-
backed up CMOS so that the information can be retained when the 
power is turned off.
By default, the MIC-5602 does not have a battery. However, a 2-pin 
header is reserved on the PCB for battery implementation with a cus-
tomized holder.

Summary of Contents for MIC-5602











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands