manualshive.com logo in svg

Advantech MIC-3389, Manual, Page: 60 / 84

Share
Download
Advantech MIC-3389 Manual Download Page 60

5 2

MIC-3389  User's Manual

5.4 Advanced BIOS Features

The "Advanced BIOS Features" screen will appear after choosing
the Advanced BIOS Feautures item from the initial setupmenu.
This screen allows users to configure the MIC-3389 according to
their particular requirements.

Below are some major items that are provided in the Advanced
BIOS Features screen:

Figure 5-3:  Advanced BIOS Features screen

Virus Warning

During and after the system boots up, any attempt to write to the
boot sector or partition table of the hard disk drive will halt the
system. If this happens, a warning message will be displayed.  You
can run the anti-virus program to locate the problem.

If Virus Warning is Disabled, no warning message will appear if
anything attempts to access the boot sector or hard disk partition.

CPU Internal Cache/External Cache

Depending on the CPU/chipset design, these options can speed
up memory access when enabled.

Summary of Contents for MIC-3389





















































































Reviews:

No comments