Advantech MIC-3332, User Manual, Page: 14 / 62

MIC-3332 User Manual 4
1.2.3 Chipset
The mobile Intel® CM236 chipset provides excellent flexibility for developers of
embedded applications by offering improved graphics and increased I/O bandwidth
over previous Intel chipsets, which offers up to 8 GT/s for fast access to peripheral
devices. It delivers outstanding system performance through high bandwidth inter -
faces such as PCI Express Gen III, Serial ATA Gen III and Hi-Speed USB 2.0 and
USB 3.0.
1.2.4 Memory
MIC-3332 has up to 16GB onboard soldered DDR4 memory, and ECC support is in
Xeon processor series. Default SKUs are 8GB and 16GB on board, you can check
the ordering information for the difference, or you can contact your local salesperson
for more information.
1.2.5 Ethernet
MIC-3332 is equipped with several high-performance PCI-Express based network
interface controllers which provide full IEEE802.3 compliant 10/100/1000Base-TX
Ethernet interfaces. There are 2 x RJ45 GbE LAN ports on the front 4HP panel, 2 x
RJ45 or 2 x M12 GbE LAN ports on front 8HP XTM-1 panel; 4 x RJ45 or 4 x M12
GbE LAN ports on the front 8HP XTM-2 panel, and another two RTM J2, You can
choose RJ-45 or X-code M12 Ethernet ports based on your requirements. For details
contact with your local salesperson for more information.

Front I/O (RJ45 or M12)

Rear I/O (Rear Transition Module)
1.2.6 Storage Interface
MIC-3332 provides up to 5 SATA III interface. Two SATA interfaces are routed to the
front XTM board with 2.5" SATA connector and CFast socket; for Plus IO SKU, there
are 3 x SATA available for PICMG, for Non Plus IO SKU, there are 2 x SATA available
for RTM. Advantech rear board MIC-3332R1-S1E with 2 x SATA 2.0 interface with
M.2 B key connector (22 x 42mm) is compatible and available, Please contact a
sales representative for more details.
1.2.7 Serial ports
One RJ-45 COM1 port (RS-232/422/485) is provided on the front panel of MIC-3332.
Another COM pin header with RS-232/422/485 is provided on the MIC-3332 8HP
XTM-1 board. If you have problems with a serial device, be sure to check pin assign -
ments in appendix A pin assignments. The IRQ and address range for these ports
are fixed. If disabled port or parameter modification is required, please refer to Chap -
ter 2.
1.2.8 USB Ports
MIC-3332 provides two or three USB 3.0 type A ports on the front panel and up to
two USB2.0 interface for CPCI Conn via J2. The MIC-3332 USB interface complies
with USB Specification R2.0 and R3.0, and is fuse protected. Please contact a sales
representative for more details.
Note!
ECC support is optional. Please contact your local sales.