Advantech MIC-3329 Series, User Manual

Page: 11 / 62

3 MIC-3329 User Manual
Chapter 1
H
ardware
C
onfiguration
1.2 Specifications
1.2.1 CompactPCI Bus Interface
The MIC-3329 is compliant with PICMG 2.0 Rev. 3.0. It supports a 32-bit / 33 MHz
PCI bus for up to 8 CompactPCI slots. The MIC-3329 is hot-swap compliant (PICMG
2.1). The board can be configured as a system master or a drone board. In drone
mode, it only draws power from the CompactPCI backplane and is not active on the
Compact-PCI bus.
1.2.2 CPU
The MIC-3329 supports the 22nm technology quad-core Intel
®
Atom™ E3845 and
dual-core Intel
®
Atom™ E3827/E3826 SOC processors with clock frequencies up to
1.91GHz. Supported processors are listed in the table below. Forced airflow cooling
is required.
1.2.3 BIOS
Dual 8Mb SPI flash contains a board-specific BIOS (from AMI) designed to meet
industrial and embedded system requirements.
1.2.4 Memory
The MIC-3329 has up to 4 GB onboard soldered DDR3L memory with ECC support.
Default SKU is 4GB on board, if you have any 2GB cost-effective SKU request,
please contact you local salesperson for more information.
1.2.5 Ethernet and VGA
The MIC-3329 uses two Intel
®
I210AT controllers to provide 10/100/1000 Mbps
Ethernet connectivity. These are mutually exclusive and can be either:
 Front I/O (RJ-45)
 Rear I/O (Rear Transition Module)
User can access LAN1/LAN2 and VGA via front panel or rear panel by setting an on-
board switch.
1.2.6 Storage Interface
The MIC-3329 supports two SATA II interfaces. XTM-1 supports 2.5" SATA, XTM-2
supports 2.5" SATA and Cfast. 8G on board NAND flash is not a standard SKU, but is
available by customer request.
Intel CPU
Model NO.
Cores Freq. CPU architecture Memory L2 Cache
CPU
TDP
E3845 4 1.91 GHz 22nm
DDR3L
1333
2 MB 10W
E3827 2 1.75 GHz 22nm
DDR3L
1333
1 MB 8W
E3826 2 1.46GHz Baytrail (22nm)
DDR3L
1066
1 MB 7W