LR77 v2
5.7.10
Reset
When
PWR
LED starts flashing on the front panel, it is possible to restore the default con-
figuration of the router by pressing the
RST
button on the front panel. After pressing this button
the default configuration is restored and then router reboots (green LED will be on).
For pressing the
RST
button could be used a narrow screwdriver.
Figure 32: Router reset
We recommend backing up configuration of the router (see
Configuration manual for v2
routers
) because reset of the router sets the configuration to the default state.
It is important to distinguish between reset and reboot the router.
Action
Router behavior
Invoking events
Reboot
Turn off and then turn on router
Disconnect and connect the power,
Press the
Reboot
button in the web
configuration
Reset
Restore default configuration and reboot
the router
Press
RST
button
Table 15: Description of reset and restart router
25
04-09-19
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: +49 911/ 957 606 00 — E-Mail: [email protected] — www.lucom.de
www
.lucom.de
