IPPC-6172F User Manual
52
Resource Controlled By
The Award Plug and Play BIOS has the capacity to automatically config-
ure all the boot and Plug and Play compatible devices. However, this
capability means absolutely nothing unless you are using a Plug and Play
operating system such as Windows® 95/98. If you set this field to "man-
ual," choose specific resources by going into each of the sub menus that
follow this field (a sub menu is preceded by a "Y"). The settings are: Auto
(ESCD) (Default), Manual.
IRQ Resources
When resources are controlled manually, assign each system interrupt a
type, depending on the type of device using the interrupt.
PCI/VGA Palette Snoop
Leave this field at Disabled. The settings are Enabled, Disabled (Default).
Maximum Payload Size
This allows you to set the maximum TLP payload size for PCI Express
devices. The options are [128 bytes], [256 bytes], [512 bytes], [1024
bytes], [2048 bytes], and [4096 bytes].
Summary of Contents for IPPC-6172F Series
