User Manual FWA-3050
_ v0.2 20200207.docx
Copyright
2017
Advantech Co. Ltd. All rights reserved.
Page 40
This sub menu allows you to change the settings used for the serial console. For example, users can define
the terminal type, bits per second, data bits, parity, stop bits and others.
Setup item
Access /
Options
Description
Console
Redirection
Disabled /
Enabled
Disabled / Enabled Console Redirection
Serial Console
Port
COM0
Serial Console Port
Terminal Type
ANSI / VT100 /
VT100+ /
VT-UTF8
Select the target terminal emulation type:
- ANSI to use the Extended ASCII Character Set.
- VT100 to use the ASCII Character set.
- VT100+ to add color and function key support.
- VT-UTF8 to use UTF8 encoding to map Unicode
characters into one or more bytes.
Serial Console
Speed
9600 / 19200 /
38400 / 57600 /
115200
Defines the baud rate.
Data Bits
7 / 8
Defines number of data bits in a character.
Parity
None / Even /
Odd / Mark /
Space
Defines the parity scheme used.
Stop Bits
1 / 2
Defines number of stop bits in a character.
Flow Control
None / Xon/Xoff
Defines the flow control scheme.
VT-UF8 Combo
Key
Disabled /
Enabled
Enables VT-UTF8 Combination Key Support for ANSI /
VT100 terminals
Recorder Mode
Disabled /
Enabled
When Enabled the data displayed on a terminal will be
captured and sent as text messages to a remote server.
Resolution
100x31
Disabled /
Enabled
Enables or disables extended terminal resolution
Legacy OS
redirection
80x24 /
80x 25
When using Legacy OS, this item specifies the Number of
Rows and Columns supported
PuTTY Keypad
VT100 /. LINUX /
XTERMR6 / SCO
/ ESCN / VT400
Select Function Key and Key Pad Emulation on PuTTY.
Redirection after
BIOS
Always Enable /
BootLoader
This defines how long console redirection will be active:
“BootLoader” means that legacy console redirection is
disabled before booting into a Legacy OS.
“Always Enable”
means
Legacy
console
Redirection
is
enabled