Advantech EKI-7712G-4FMPI, User Manual

Page: 127 / 169

113 EKI-7712G-4FMPI User Manual
The ensuing table for PoE Information settings are informational only: Port, Enable
State, Power Limit From Classification, Priority, Legacy and Power Limit (W).
Figure 4.146 PoE Information
4.9.3.3 PoE Port Status
To access this page, click
Management
>
Power Over Ethernet
>
PoE Port Status
.
The ensuing table for
PoE Port Status
settings are informational only: Port, Current
(mA), Voltage (V), Power (W) and Temp. (°C).
Figure 4.147 Management > Power Over Ethernet > PoE Port Status
4.9.4 TCP Modbus Settings
The TCP Modbus function allows for client-server communication between a switch
module (server) and a device in the networking running MODBUS client software (cli -
ent).
4.9.4.1 TCP Modbus Settings
The TCP Modbus Settings page allows you to configure the modbus function.
To access this page, click
Management > TCP Modbus Settings > TCP Modbus
Settings .
Figure 4.148 Management > TCP Modbus Settings > TCP Modbus Settings
The following table describes the items in the previous figure.
Priority Click the drop-down menu to configure the power supply priority:
Critical , Low or High . Default is Low .
Class Error byPass Select Enabled or Disabled to designate the Class Error byPass
mode.
Apply Click Apply to save the values and update the screen.
Item Description
Item Description
State Click Disabled or Enabled to set the TCP Modbus state.