Advantech EKI-7712G-4FMPI, User Manual

Page: 126 / 169

EKI-7712G-4FMPI User Manual 112
4.9.3.1 PoE System Settings
The PoE System Settings page allows you to configure the overload disconnect and
the maximum available wattage.
To access this page, click
Management > Power Over Ethernet > PoE System
Settings .
Figure 4.143 Management > Power Over Ethernet > PoE System Settings
The following table describes the items in the previous figure.
The ensuing table for PoE System Information settings are informational only: Firm -
ware Version, Maximum Power Available, Actual Power Consumption and Overload
Disconnect Type.
Figure 4.144 PoE System Information
4.9.3.2 PoE Port Settings
The PoE Port Settings page allows you to configure the port status, its power limita -
tions, legacy mode status, and power limit settings.
To access this page, click
Management > Power Over Ethernet > PoE Port Set -
tings .
Figure 4.145 Management > Power Over Ethernet > PoE Port Settings
The following table describes the items in the previous figure.
Item Description
Maximum Power
Available
Select the value in Watts to set the maximum available power.
Apply Click
Apply
to save the values and update the screen.
Item Description
Port Click the drop-down menu to select a PoE port.
Power Switch Select Enabled or Disabled to designate the PoE port function by
ports.
Legacy Mode Select Enabled or Disabled to designate the legacy mode.