Advantech EKI-7556MI, User Manual, Page: 42 / 105

Commands Level Description Example
monitor rx
G
Set RX destination port of monitor
function switch(config)#
monitor rx
monitor tx
G
Set TX destination port of monitor
function switch(config)#
monitor tx
show monitor
P
Show port monitor information switch#
show monitor
monitor
[RX|TX|Both] I
Configure source port of monitor
function switch(config)#
interface fastEthernet 2
switch(config-if)#
monitor RX
show monitor
I
Show port monitor information switch(config)#
interface fastEthernet 2
switch(config-if)#
show monitor
no monitor
I
Disable source port of monitor
function switch(config)#
interface fastEthernet 2
switch(config-if)#
no monitor
3.2.13 802.1x Commands Set
Table 3.13: 802.1x Commands Set
Commands Level Description Example
8021x enable
G
Use the 802.1x global
configuration command to enable
802.1x protocols. switch(config)#
8021x enable
8021x system radiusip
[IP address] G
Use the 802.1x system radius IP
global configuration command to
change the radius server IP. switch(config)#
8021x system radiusip 192.168.1.1
8021x system serverport
[port ID]
G
Use the 802.1x system server port
global configuration command to
change the radius server port switch(config)#
8021x system serverport 1815
8021x system accountport
[port ID] G
Use the 802.1x system account
port global configuration command
to change the accounting port switch(config)#
8021x system accountport 1816
8021x system sharekey
[ID] G
Use the 802.1x system share key
global configuration command to
change the shared key value. switch(config)#
8021x system sharekey 123456
8021x system nasid
[words] G
Use the 802.1x system nasid
global configuration command to
change the NAS ID switch(config)#
8021x system nasid test1
8021x misc quietperiod
[sec.]
G
Use the 802.1x misc quiet period
global configuration command to
specify the quiet period value of
the switch. switch(config)#
8021x misc quietperiod 10
8021x misc txperiod
[sec.] G
Use the 802.1x misc TX period
global configuration command to
set the TX period. switch(config)#
8021x misc txperiod 5
8021x misc supportimeout [sec.]
G
Use the 802.1x misc supp timeout
global configuration command to
set the supplicant timeout. switch(config)#
8021x misc supportimeout 20
8021x misc servertimeout [sec.]
G
Use the 802.1x misc server
timeout global configuration
command to set the server
timeout. switch(config)#
8021x misc servertimeout 20
8021x misc maxrequest [number]
G
Use the 802.1x misc max request
global configuration command to
set the MAX requests. switch(config)#
8021x misc maxrequest 3
8021x misc reauthperiod [sec.]
G
Use the 802.1x misc reauth period
global configuration command to
set the reauth period. switch(config)#
8021x misc reauthperiod 3000
8021x portstate
[disable | reject | accept | authorize] I
Use the 802.1x port state interface
configuration command to set the
state of the selected port. switch(config)#
interface fastethernet 3
switch(config-if)#
8021x portstate accept
show 8021x
E
Displays a summary of the 802.1x
properties and also the port sates. switch>
show 8021x
EKI-7556MI_Manual 42