EKI-6333AC-M12 Series User Manual
21
3.4.2.2
Advanced
To access this page, click
Wireless Settings
>
WLAN
>
Advanced
.
Figure 3.7 Wireless Settings > WLAN > Advanced
The following table describes the items in the previous figure.
Lazy WDS
Click the checkbox to enable the lazy WDS function.
BSSID
Display the MAC address of the device.
Operation Frequency
Country Code
Click the drop-down menu to select the country code to specify
different selectable channels. Some specific channels and/or
operational frequency bands are country dependent.
Band
Click the drop-down menu to select the band channel.
Network Mode
Click the drop-down menu to select the network mode.
Channel Bandwidth
Click the drop-down menu to select the band and channel
bandwidth.
Channel / Frequency
Select the 2.4 or 5G wireless frequency to the least congested
channel. The available settings on a 2.4G setting are 2.412 GHz to
2.484 GHz. For 5G, the available settings are 5.18 GHz to 5.825
GHz. The function is only enabled when Operation Mode is set to
Access Point.
Submit
Click
Submit
to save the values and update the screen.
Item
Description
Item
Description
Access Point Settings
Beacon Interval
Enter a value (20-999) to specify the frequency interval to
broadcast packets.
Data Beacon Rate
(DTIM)
DTIM, which stands for Delivery Traffic Indication Message, is
contained in the data packets. It is for enhancing the wireless
transmission efficiency. The default is set to 2. Enter a value
between 1 and 255.
Advanced Wireless Setting
Transmission Power
Use the scroll bar to set the transmission power of the WiFi. By
default the AP transmits at full power: Full, Half, Quarter.
Submit
Click
Submit
to save the values and update the screen.
