14
EKI-6333AC-M12 Series User Manual
2.2.6.5
Standard M12 5-Pin Female Pin Assignment
This section describes the proper connection of the 24, 48, 72, 96 and 110 V
DC
to the
DC power connector on the switch. The DC input connector is located on the left side
of the front panel. The power terminals are connected as shown in the following
figure. They are electrically floating inside the unit so that either may be grounded by
the user if desired. The chassis is earthened or ground (GND). The mating
connection to the switch is created through a RD24, female connector. Simply align
the keyed female connector to the male connector and twist the threaded to secure.
Figure 2.15 Standard M12 5-Pin Female DC Power Input Connector
Pin
Description
1
V1-
2
V2-
3
V2+
4
V1+
5
GND
2
1
3
5
4
