manualshive.com logo in svg

Advantech EKI-6331AN-BE, User Manual, Page: 12 / 72

Share
Download
Advantech EKI-6331AN-BE User Manual Download Page 12

EKI-6331AN-BE/EKI-6332GN-AE User Manual

2

1.1

Introduction

EKI-6332GN-AE/EKI-6331AN-BE is a high-performance last-mile broadband solution
that provides reliable wireless network coverage. Designed with IEEE 802.11n stan-
dard, 2x2 MIMO technology and high output power makes it possible deliver up to
300Mbps high data rate with longer range for general purpose application.  EKI-
6332GN-AE operates at 2.4GHz band while EKI-6331AN-BE operates at 5GHz
band.

EKI-6332GN-AE/EKI-6331AN-BE can be used as the access point, the client, the
WDS and the AP Repeater. While being as the access point, it can be deployed to
provide wireless networking service. In the other way to be as the client, it can
receive wireless signal over the last mile, helping WISPs deliver internet service to
the new residential and the business customer where wired broadband internet ser-
vice, such as cable and DSL, cannot serve in. In addition, the easy-to-install EKI-
6332GN-AE/EKI-6331AN-BE features with outstanding throughput performance and
a cost-effective design that allows users to have the reliable equipment at the afford-
able price.

1.2

Appearance

Figure 1.1 EKI-6332GN-AE/EKI-6331AN-BE

Summary of Contents for EKI-6331AN-BE









































































Reviews:

No comments