13
2.4.3
Set Operating Mode, IP Address, Subnet Mask, Default Route IP,
DNS Server IP of EKI-6311G
►
LAN Settings
These are the settings of the LAN (Local Area Network) interface for the Access
Point. The Access Point's local network (LAN) settings are configured based on the
IP Address and Subnet Mask assigned in this section. The IP address is also used
to access this Web-based management interface. This
option is available in the
“/NETWORK/ NETWORK /” page as shown in Figure 2-7.
Figure 2-7
►
Get LAN IP From
Choose "DHCP (Dynamic)" if your router supports DHCP and you want the router
to assign an IP address to the AP. In this case, you do not need to fill in the
following fields. Choose "Static IP (Manual)" if your router does not support DHCP
or if for any other reason you need to assign a fixed address to the AP. In this case,
you must also configure the following fields.
Note that you cannot choose "DHCP (Dynamic)" if you have enabled the "DHCP
Server" option on the DHCP page; the AP cannot be both a DHCP client and a
DHCP server.
►
IP Address
