![background image](http://html1.mh-extra.com/html/advantech/eki-1751pi-m-ae/eki-1751pi-m-ae_user-manual_2857227011.webp)
EKI-1751PI Series User Manual
2
1.1
Description
EKI-1751PI Series Long Reach PoE Extenders are designed to extend the reach of
Ethernet Data and IEEE 802.3at Power over Ethernet beyond its natural limitations of
100 meters for the network infrastructure. The solution works in pairs for point to
point connectivity. It features EKI-1751PI-M-AE Long Reach PoE Extender that the
master unit is at the central site and on the receiving end is EKI-1751PI-R-AE Long
Reach PoE Extender with 4 PoE (PSE) ports. Under Remote Power Mode, each EKI-
1751PI-R-AE is equipped with four 10/100Base-TX IEEE 802.3at PoE Ports for a
total power budget of 30W; Support any remote IEEE 802.3at/af powered device
(PD) like Wi-Fi Access Point, IP phone, and IP Camera. It enables centralized man-
agement of power supply from a single location for easy, efficient and cost-effective
installation. When enabling Local Power Mode by dip switch, EKI-1751PI-R-AE can
supply power budget of 30W to each of the four PoE ports. Proscend EKI-1751PI
Series Long Reach PoE Extenders is an ideal PoE extension solution for service pro-
viders to deploy networking applications in public areas that requires Wireless AP, IP
Phones and IP Cameras.
1.2
Features
Complies to IEEEE 802.3at PoE
Industrial-Grade Extenders for applications in harsh environment
Simultaneous transmission of Ethernet data and PoE Power over UTP wire or
coaxial cable
Centralized management of power supply
Eliminated the need for local power supply at remote sites
Easy cabling for quick installation
Long transmission distance up to 1,000 m
Quick deployment and easy maintenance.
Flexible and efficient power management
Dip Switch to enable local power supply and provide full 30W to each of the four
PoE ports.
1.3
Specifications
Specifications
Description
Hardware Interfaces
Terminal Block for Copper Port
BNC Female for Coaxial Port
4 x RJ-45 10/100Base-TX IEEE 802.3at PoE Port
3 Position Dip Switch
Selectable target band plan (Asymmetric or Symmetric)
Selectable target SNR margin (6dB or 9dB)
Selectable Remote Power (ON) or Local Power (OFF)
LED Indicators
Active: System Status
LPWR/RPWR: Local Power/Remote Power
PoE: PoE Port Status
Available PoE Output (Watts): 5/15/30
Line Speed (Mbps): Link/20/40/60/80/100
Summary of Contents for EKI-1751PI-M-AE
