manualshive.com logo in svg

Advantech EKI-1526, User Manual

Share
Download
Advantech EKI-1526 User Manual Download Page 75

63

EKI-1526(TI) | 1528(TI) User Manual

 

6.7

Alert

On the Alert Settings page, you may configure how administrators are notified by cer-
tain system, network, configuration, power, and cellular connection events. Rely on
the events, administrators can collect different options for automatic notification. 

Mail

refers to send an e-mail to a specified mail address. 

Trap

 refers to send an SNMP

Trap. 

Agent

 refers to send the SNMP agent setting.

6.7.1

Setting

To access this page, click 

Alarm

 > 

Setting

.

Figure 6.10 Alarm > Setting

The following table describes the items in the previous figure.

Item

Description

Mail Server

Mail Server

This field is for your mail server’s domain name or IP address.

From Email address

This is the e-mail address from which automatic e-mail warnings will 
be sent.

Email addresses 1-4 This is the e-mail address or addresses to which the automatic e-mail 

warnings will be sent.

SNMP Trap Server

Summary of Contents for EKI-1526

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands