Advantech DSA-3020, User Manual

Page: 39 / 48

29 DSA-3020 User Manual
Chapter 4
A
ward
BIOS
Setup
4.2.7 PnP/PCI Configurations
„
Init Display First [PCI Slot]
This item is setting for start up Video output from PCI or Onboard device.
„
Reset Configuration Data [Disabled]
This item allow the user to clear any PnP configuration data stored in the BIOS.
„
Resources Controlled By [Auto (ESCD) ]
„
PCI VGA Palette Snoop [Disabled]
The item is designed to solve problems caused by some non-standard VGA
cards. A built-in VGA system does not need this function.
„
INT Pin 1~8 Assignment [Auto]
The interrupt request (IRQ) line assigned to a device connected to the PCI inter-
face on your system.
Note! This “PnP/PCI Configurations” option is setting up the IRQ and DMA
(both PnP and PCI bus assignments.
– IRQ Resources
This item allows you respectively assign an interruptive type for IRQ-3, 4, 5,
7, 9, 10, 11, 12, 14, and 15.
– DMA Resources
This item allows you respectively assign an interruptive type for DMA, 0, 1,
2, 3, 4, 5, 6, and 7.