DSA-3020 User Manual
28
Mode= Disabled or 1 min ~1 hr.
Video Off Method [DPMS]
This item allows the user to determine the manner is which the monitor is
blanked.
Video Off In Suspend [Yes]
This item allows the user to turn off Video during system enter suspend mode.
Suspend Type [Stop Gran]
This item allows the user to determine the suspend type.
Modem use IRQ [3]
This item allows the user to determine the IRQ which the MODEM can use.
Suspend Mode [1 Hour]
This item allows the user to determine the time of system inactivity, all devices
except the CPU will be shut off.
HDD Power Down Mode [15 Min]
This item allows the user to determine the time of system inactivity, the hard disk
drive will be powered down.
Soft-Off by PWR-BTTN [Enabled]
This item allows the user to define function of power button.
Watch Dog Timer Function
After choosing 20 sec if the system hangs on the POST screen, then the system will
auto reset after 20 seconds.
–
Max Saving
Maximum power management. Suspend Mode=1 min.
–
User Define
Allows the user to set each mode individually. Suspend
–
V/H SYNC+Blank This option will cause the system to turn off vertical and
horizontal synchronization ports and write blanks to the
video buffer.
–
Blank Screen
This option only writes blanks to the video buffer.
–
DPMS
Initial display power management signaling.
–
Instant-Off
Press power button then Power off instantly.
–
Delay 4 Sec
Press power button 4 sec. to Power off.
Summary of Contents for DSA-3020
