![background image](http://html1.mh-extra.com/html/advantech/compactpci-mic-3021-8/compactpci-mic-3021-8_manual_2857209021.webp)
Chapter 2 Installation 21
Follow the procedures below to install a device:
1. Fasten one pair of mounting brackets to both sides of a 5.25" device
(or a 3.5" device with extension brackets). Note that the guide edge
of the mounting brackets should be at the lower side.
2. Unfasten and remove the cover plate of the device tray.
3. Insert the device into the device tray.
4. Fasten the mounting brackets, then fasten the cover plate (for
internal devices only).
5. Remove the back cover of the chassis and connect cables to the
installed device and to the backplane.
6. Reattach the back cover.
One device space is available next to the fan tray module in the 7U
high version of the MIC-3021/8, which can be used for installing a
5.25" device. One pair of mounting brackets without guiding flange
are included for mounting the device. Since the brackets are not
guided, we recommend that users install only a half-height device such
as a CD-ROM or a removable drive mount.
Figure 2-5: Attaching the mounting brackets to a 5.25" device
Summary of Contents for CompactPCI MIC-3021/8
