iMcV-LIM
14
LED OPERATION
iMcV-LIM module diagnostic LEDs provide information on features and ports.
FEF
Glows green when a fiber end fault is
detected.
TXLL
Glows green when TX LinkLoss is
enabled on the port.
Blinks when a fault occurs on the
copper port and actively disables the
fiber port.
LNK
Glows green when fiber link is
established.
Blinks green when activity is
detected.
*DIS
Glows amber when software is
disabled on the TX port.
FA
Glows green when FiberAlert is
enabled.
Blinks green when active.
FXLL
Glows green when FX LinkLoss is
enabled on the port.
Blinks when a fault occurs on the
fiber port and actively disables the
copper port.
LNK
Glows green when fiber link is
established.
Blinks green when activity is
detected.
*DIS
Glows amber when software is
disabled (via iView
2
) on the fiber port.
NOTE
: *For iMcV-LIM w/SFP and Configuration Control: DIS indicates TX (copper) or TX (fiber) port is
disabled either by DSW #7,8 or via iView². Refer to the DIP Switch matrix under Unmanaged Modules.
CONFIG CONTROL
