Advantech B+B SMARTWORX IE-iMcV-E1-Mux/4 User Manual Download

Page: 38 / 38

iMcV-E1-Mux4, Ethernet Enhanced

STANDARDS/COMPLIANCES

•

IEEE 802.3x Flow Control

•

IEEE 802.3i 10Base-T twisted pair

•

IEEE 802.3u 100Base-TX twisted pair

•

IEEE 802.3u 100Base-FX or SX fiber

•

ITU G.775

•

GR-820-CORE

The products described herein comply with the Council Directive on

Electromagnetic Compatibility (2004/108/EC) and the Council Directive on

Electrical Equipment Designed for use within Certain Voltage Limits

(2006/95/EC). Certified to Safety of Information Technology Equipment,

Including Electrical Business Equipment. For more details, contact B+B

SmartWorx.
European Directive 2002/96/EC (WEEE) requires that any equipment that

bears this symbol on product or packaging must not be disposed of with

unsorted municipal waste. This symbol indicates that the equipment should be

disposed of separately from regular household waste. It is the consumer’s

responsibility to dispose of this and all equipment so marked through

designated collection facilities appointed by government or local authorities.

Following these steps through proper disposal and recycling will help prevent

potential negative consequences to the environment and human health. For

more detailed information about proper disposal, please contact local

authorities, waste disposal services, or the point of purchase for this

equipment.

subject to change without notice. B+B SmartWorx assumes no responsibility for any errors that may appear

in this document. IE-iMcV-E1-Mux/4 is a trademark of B+B SmartWorx. Other brands or product names

may be trademarks and are the property of their respective companies.

Documentation Number: IE-iMcV-E1-Mux4-EthEnhanced_4618m

Summary of Contents for B+B SMARTWORX IE-iMcV-E1-Mux/4







































Search results

Summary of Contents for B+B SMARTWORX IE-iMcV-E1-Mux/4

Reviews:

Related manuals for B+B SMARTWORX IE-iMcV-E1-Mux/4

Brands by name

Popular brands

Advantech B+B SMARTWORX IE-iMcV-E1-Mux/4, User Manual

Search results

Summary of Contents for B+B SMARTWORX IE-iMcV-E1-Mux/4

Reviews:

Related manuals for B+B SMARTWORX IE-iMcV-E1-Mux/4

Brands by name

Popular brands