iMcV-E1-Mux4, Ethernet Enhanced
22
UNIT CONFIGURATION SCREEN
The unit configuration screen displays the names of the Host and Remote
units as well as the service state, whether fiber protection is enabled and the
SFP BER alarm level. In addition, the unit time can be set from this screen
and the username and password can be set/reset.
The screen displays the current status for items 1 through 8. For security
reasons, the current username and password are not displayed.
For items 1 through 8, enter the number of the menu item to be changed, and
then enter the new value when prompted. The unit and port names can be
assigned by the end-user and are used in SNMP associated TRAP alarm
messages.
ETHERNET PORT FLOW CONTROL
Flow Control can be enabled to allow large amounts of data packets to pass
without dropping them. The feather allows the end user to handle network
congestion.
