Advantech AWS-8430T, User Manual

Page: 83 / 84

Appendix B Touchscreen Driver Installation 7 1
B.1.4.5 Demonstration
To demonstrate or test touch screen operation, select “3”
DRAWING TEST in PM.BAT file of Utility Directory. Drawing
on screen.
The other demonstration program called “ICECREAM.EXE” in
the “PENMOUNT” directory can also be applied.
Now, the PenMount DOS driver is installed.
B.1.4.6 PenMount DOS driver functions
There are several functions in the PenMount DOS driver. The
user is able to change the settings of the following utilities:
1) Show Current Setting
A. The current setting data could be found from
PM.BAT file.
B. The procedure to get the status is C:\PENMOUNT\PM
C. Choose “2” SHOW CURRENT SETTINGS
2) Beep Sound On or Off
A. Beep sound is able to set ON or OFF with parameter.
B. Enable Beep Sound command is
C:\PENMOUNT\PMOUSE /S.
C. Disable Beep Sound (Default) command is
C:\PENMOUNT\PMOUSE.
3) Getting current touch’s data
A. To get the touching data, use “PMGET.EXE” utility.
This utility is only available for COM 1 or COM 2 port.
C:\PENMOUNT\PMGET <COM port> <baud rate>
B. User will see the touching point address in the pop-up
window.