Advantech ARK-5420 Series User Manual Download Page 58

Page: 58 / 80

ARK-5420 User Manual



Discard Changes and Reset

Select this option to quit Setup without making any permanent changes to the
system configuration.

Select Discard Changes and Reset from the Exit menu and press <Enter>.

The following message appears:
Discard Changes and Reset Setup Now?
[Ok] [Cancel]

Select Ok to discard changes and exit.



Save Changes

This item allows users to save changes done so far to any of the options.



Discard Changes

This item allows users to discard changes done so far to any of the options.



Restore Defaults

This item allows users to restore/load default values for all the options.



Save as User Defaults

This item allows users to save the changes done so far as user defaults.



Restore User Defaults

This item allows users to restore the user defaults to all the options.



Boot Override

This item allows users to set boot device.



Launch EFI Shell from file system device

This item allows booting of EFI shell from system file device.

Summary of Contents for ARK-5420 Series

















































































Search results

Summary of Contents for ARK-5420 Series

Reviews:

Related manuals for ARK-5420 Series

Brands by name

Popular brands

Advantech ARK-5420 Series, User Manual

Search results

Summary of Contents for ARK-5420 Series

Reviews:

Related manuals for ARK-5420 Series

Brands by name

Popular brands