Advantech ARK-5420 Series User Manual Download

Page: 49 / 80

ARK-5420 User Manual

Chapter 4

IOS Setting

–

xHCI Mode

This item is used to select xHCI controller mode. The default setting is “Smart
Auto”.

–

HS Port #1/#2/#3/#4 Switchable

Enable: BIOS will let the port connect to EHCI; Disable: BIOS will let the port
connect to xHCI. The default setting is “Enable”.

–

xHCI Streams

This item allows users to enable or disable xHCI Maximum Primary Stream
Array Size.

–

EHCI1/EHCI2

This item allows users to enable or disable EHCI #1/EHCI #2. The default
setting is “Enable”.

–

USB Ports Per-Port Disable Control

This item is used to set disable control of each USB connector.



PCH Azalia Configuration

Figure 4.19 PCH Azalia Configuration

–

Azalia

This item is used to detect any Azalia device. The default setting is “Enable”.
Disabled: Azalia will be unconditionally disabled.
Enabled: Azalia will be unconditionally Enabled.
Auto: Azalia will be enabled if present, disabled otherwise.

Summary of Contents for ARK-5420 Series

















































































Search results

Summary of Contents for ARK-5420 Series

Reviews:

Related manuals for ARK-5420 Series

Brands by name

Popular brands

Advantech ARK-5420 Series, User Manual

Search results

Summary of Contents for ARK-5420 Series

Reviews:

Related manuals for ARK-5420 Series

Brands by name

Popular brands