Advantech ARK-3400, User Manual, Page: 48 / 87

ARK-3400 User Manual 36
3.2.7 PnP/PCI Configurations
Figure 3.7 Award BIOS PnP/PCI Configurations
„ Init Display First [PCI Slot]
This item is setting for start up Video output from PCI or Onboard device.
„ Reset Configuration Data [Disabled]
This item allow user to clear any PnP configuration data stored in the BIOS.
„ Resources Controlled By [Auto (ESCD)]
– IRQ Resources
This item allows you respectively assign an interruptive type for IRQ-3, 4, 5,
7, 9, 10, 11, 12, 14, and 15.
„ PCI VGA Palette Snoop [Disabled]
The item is designed to solve problems caused by some non-standard VGA
cards. A built-in VGA system does not need this function.
„ Maximum payload Size [4096]
The item allows user to adjust maximum TLP (Transaction Layer Packet) pay-
load size.
Note! Use this "PnP/PCI Configurations" option for setting up the IRQ and
DMA (both PnP and PCI) bus assignments.