Advantech ARK-3384 Series, User Manual

Page: 84 / 106

ARK-3384 User Manual 66
Chapter 7 Ethernet Setup
7.1 Introduction
The ARK-3384 is equipped with a high performance 32-bit Ethernet
chipset which is fully compliant with IEEE 802.3 100 Mbps CSMA/CD
standards. They are supported by major network operating systems. They
are also both 100Base-T and 10Base-T compatible. The network boot
feature can be utilized by incorporating the boot ROM image files for the
appropriate network operating system. The boot ROM BIOS files are
combined with system BIOS, which can be enabled/disabled in the BIOS
setup.
7.2 Installation of Ethernet driver
Before installing the Ethernet driver, note the procedures below. You
must know which operating system you are using in your ARK-3384
Series, and then refer to the corresponding installation flow chart. Then
just follow the steps described in the flow chart. You will quickly and
successfully complete the installation, even if you are not familiar with
instructions for MS-DOS or Windows.
7.2.1 Installation for Windows 2000/XP
1. Select "Start", "Settings". "Control Panel".
Note: The windows illustrations in this chapter are examples only.
Follow the steps and pay attention to the instructions which appear on
your screen.
2. Double click "Add/Remove Hardware".