Advantech AMAX-5400 Series, User Manual

Page: 30 / 70

AMAX-5580 User Manual 20
3.3.3 Attaching on the DIN-rail
Please follow the steps below to secure AMAX-5580 on the DIN-rail:
Step1: Unlock the latches at the bottom of AMAX-5580 and AMAX-54XX
Step2: Place the AMAX-5580 on the DIN-rail, hang the device on the top side of the
DIN-rail then push the lower side of the device onto the DIN-rail.
Step3: Lock the latches
3.3.4 Install the AMAX-50XX right-hand-side modules
Follow the steps to slide in the modules one by one:
Step1: Unlock the latched at the bottom of AMAX-50XX
Step2: Remove the protection cover on the right-side of AMAX-5580, and slide in the
module on the side of the AMAX-5580
Step3: Touch the orange part on the lower side to release the latch to lock the module
on the DIN-rail
Figure 3.2 AMAX-5000 installed in a control box
3.3.5 Serial Port Isolation Recommendation
For better surge protection of AMAX-5580 from external serial communication, it's
recommended to install some isolation device. For example, local left-side expansion
module AMAX-5490 or ADAM-4520, integrated with on board serial ports, both
ensure surge protection from external CPU units.
Note! The AMAX-50XX on the right-hand-side has independent power system. AMAX-
5001, smart power input terminal should be the first module to supply the power
to the right side AMAX-50XX modules.
Power Supply
Power Supply
Remote I/O
Controller