Advantech AMAX-5400 Series, User Manual

Page: 27 / 70

17 AMAX-5580 User Manual
C
ha
pte
r 3
In
itia
l S
etu
p
The default power mode is AT mode, the system will boot as long as there is one
valid power input from 1 or 2. Please check below LED to make sure the system is
properly powered.
NOTE: Please do not assemble or disassemble the system while the PWR /STBY
LED is on. Please make sure power is completely off and every LED is off before
changing hardware.
To enhance the system availability, AMAX-5580 provides dual power input functions
to support main power input and backup power input. If either power input encoun -
ters trouble it will trigger the alarms below:
1. The LED “ERR VOL” turns “On”
2. The RL+ /RL- on the Power Input Terminal changes (Refer to p.20 ERR-LOG -
IC1)
3. The system tag changes and can be accessed remotely.
3.2 System Configuration and Installation
Please refer to section 1.1, table 2 to do the necessary configuration or maintenance.
Please follow below step to open the front cover to do access the internal system
components:
Step1: Remove the 7-pin power input wiring terminal on the top of the device
Step2: Remove the USB/HDMI fix kit from the front cover (Option)
Step3: Remove 2 screws on the lower side of the front cover
Step4: Move the cover upward slightly and move forward.
Do the following:

Install the M.2 SSD storage
This is the SSD storage for the operating system, we suggest using industrial
grade SSD to ensure system reliability. Please refer to the datasheet to check
the parts which have been verified as working well with the system.
After installing the SSD, please fix the SSD in the slots with the screws pro -
vided.

Install the PCIe-mini card module
Users can install a PCIe-mini card module in the PCIe-mini card slot. For exam -
ple:
2 PSD-A120W24
DIN Rail AC to DC 100-240V 120W
24V
3 96PSD-A240W24-MN
DIN Rail AC to DC 100-240V 240W
24V
Table 3.4: LED Power Status
Model LED Status Definition
AMAX-
5580
PWR
Green System Power OK
Orange System Standby
AMAX-
54XX
PWR Green System Power OK
STBY Orange System Standby
Table 3.3: List of Verified Power Supply Units