manualshive.com logo in svg

Advantech AIMB-786, User Manual

Share
Download
Advantech AIMB-786 User Manual Download Page 72

AIMB-786 User Manual

60

PEG Port Feature Configuration

–

Detect Non-Compliance Device

Detect non-compliance PCI Express device in PEG. If enabled, it will take more
time at POST time.

3.2.3.5

PCH-IO Configuration

 

Figure 3.42 PCH-IO Configuration

LAN1 Controller

"Enable or Disable" LAN1 controller.

LAN1 Option-ROM

"Enable or Disable" LAN1 boot option for legacy network devices.

LAN2 Controller

"Enable or Disable" LAN2 controller.

LAN2 Option-ROM

"Enable or Disable" LAN2 boot option for legacy network devices.

PCIE Wake

"Enable or Disable" PCIE to wake the system from S5. When this item is
selected as  "Disabled", Wake on LAN2 function is also disabled.

PowerOn by Modem

"Enable and Disable" PowerOn by Modem

Deep Sleep

"Enable or Disable" Deep Sleep.

Restore AC Power Loss

Behavior when recovering from AC power loss: "S0" (power on), "S5" (power
off), or "Last State".

Summary of Contents for AIMB-786





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands