Advantech AIMB-786, User Manual

Page: 31 / 116

19 AIMB-786 User Manual
Chapter 2
C
onnecting
Peripherals
2.8.1 Power LED and Keyboard Lock (JFP3)
JFP3 is a 5-pin connector for the power LED and keyboard lock. Refer to Appendix B
for detailed information on the pin assignments. If a PS/2 or ATX power supply is
used, the system’s power LED status will be as indicated as follows.
2.8.2 External Speaker (JFP2 pins 1, 4, 7, 10)
JFP2 is a 8-pin connector for an external speaker. The AIMB-786 provides an
onboard buzzer as an alternative. To enable the buzzer, set pins 7-10 as closed.
2.8.3 HDD LED Connector (JFP2 pins 2, 5)
You can connect a LED to pins 2 and 5 of JFP2 to indicate when the HDD is active.
2.8.4 SMBus Connector (JFP2 pins 8, 11)
AIMB-786 supports Advantech SAB-2000 module for providing a platform indepen-
dent system management. When installing SAB-2000 module on AIMB-786, please
connect it to pins 8 and 11 of JFP2.
2.8.5 ATX Soft Power Switch (JFP1 pins 3, 6)
If your computer case is equipped with an ATX power supply, you should connect the
power on/off button on your computer case to pins 3 and 6 of JFP1. This connection
enables you to turn your computer on and off.
2.8.6 Reset Connector (JFP1 pins 9, 12)
Many computer cases offer the convenience of a reset button.
Table 2.1: PS/2 or ATX power supply LED status
Power mode LED (PS/2 power) LED (ATX power)
System On On On
System Suspend Fast flashes Fast flashes
System Off Off Off
System Off in deep sleep Off Off