Advantech AIMB-786, User Manual

Page: 24 / 116

AIMB-786 User Manual 12
1.9 System Memory
AIMB-786 has four 288-pin memory sockets for DDR4 2400/2666 memory modules
with maximum capacity of 64 GB (Maximum 16 GB for each DIMM). AIMB-786 only
supports non-ECC DDR4 memory modules.
Please note that AIMB-786 does NOT support registered DIMMs (RDIMMs).
1.10 Memory Installation Procedures
To install DIMMs, first make sure the two handles of the DIMM socket are in the
“open” position. i.e. The handles lean outward. Slowly slide the DIMM module along
the plastic guides on both ends of the socket, and then press the DIMM module right
down into the socket, until you hear a click. This is when the two handles have auto-
matically locked the memory module into the correct position of the DIMM socket. To
remove the memory module, just push both handles outward, and the memory mod-
ule will be ejected by the mechanism in the socket.
Note! Because AIMB-786 supports Intel Active Management Technology
(iAMT) which utilizes some memory space of channel 0, it's suggested
that the user installs at least one memory module on channel 0 DIMM
slot (DIMMA1 or DIMMA2), or it may cause some system abnormality.