Advantech AIMB-273 User Manual Download Page 73

Page: 73 / 102

AIMB-273 User Manual

Chapter 3

IOS Operation

3.2.6

Save & Exit



Save Changes and Exit

This item allows you to exit system setup after saving changes.



Discard Changes and Exit

This item allows you to exit system setup without saving any changes.



Save Changes and Reset

This item allows you to reset the system after saving the changes.



Discard Changes and Reset

This item allows you to rest system setup without saving any changes.



Save Changes

This item allows you to save changes done so far to any of the options.



Discard Changes

This item allows you to discard changes done so far to any of the options.



Restore Defaults

This item allows you to restore/load default values for all the options.



Save as User Defaults

This item allows you to save the changes done so far as user defaults.



Restore User Defaults

This item allows you to restore the user defaults to all the options.



Boot Override

Boot device select can override your boot priority.

Summary of Contents for AIMB-273







































































































Search results

Summary of Contents for AIMB-273

Reviews:

Related manuals for AIMB-273

Brands by name

Popular brands

Advantech AIMB-273, User Manual

Search results

Summary of Contents for AIMB-273

Reviews:

Related manuals for AIMB-273

Brands by name

Popular brands