Advantech AIMB-273 User Manual Download Page 54

Page: 54 / 102

AIMB-273 User Manual

3.2.2.10

Intel AMT Configuration



Intel AMT

This item allows users to enable or disable Intel AMT BIOS extension.



BIOS Hotkey Pressed

This item allows users to enable or disable BIOS hotkey press.



MEBx Selection Screen

This item allows users to enable or disable MEBx selection screen.



Hide Un-Configuration ME Confirmation

This item allows users to hide un-configure ME without password confirmation
prompt.



MEBx Debug Message Output

This item allows users to enable or disable MEBx debug message.



Un-Configure ME

This item allows users to un-configure ME without password.



Amt Wait Timer

Set timer to wait before sending ASF_GET_BOOT_OPTIONS.



Disable ME

This item allows users to enable or disable ME function.



ASF

This item allows users to enable or disable Alert Specification Format.



Activate Remote Assistance Process

This item allows users to enable or disable trigger CIRA boot.



USB Configure

This item allows users to enable or disable USB configure function.

Summary of Contents for AIMB-273







































































































Search results

Summary of Contents for AIMB-273

Reviews:

Related manuals for AIMB-273

Brands by name

Popular brands

Advantech AIMB-273, User Manual

Search results

Summary of Contents for AIMB-273

Reviews:

Related manuals for AIMB-273

Brands by name

Popular brands